Modular system to suit any New Holland baler square baler

600 series CropSaver is a complete application system for the New Holland Big Baler.  Accurate moisture monitoring, applying CropSaver preservative to add up to 30% more baler output, offering complete traceability from field to end user. CropSaver is fully integrated to the New Holland Big Baler with the entire information displayed on the IntelliView IV monitor or via the tractors ISOBUS monitor

New....  Where ISOBUS is not available or not required the unit can be controlled by your IPad via the Bluetooth antenna

CropSaver moisture monitor will accurately measure moisture to within 1% in all crops with a range of 8-72%.  The live information is displayed on the screen with the average for the previous bale.

Moisture Only is a fully integrated moisture system

Moisture Pro is a fully integrated moisture system and all HayBoss modules can be added via plug & play

CropSaver Automatic Applicator utilise the accurate moisture readings and balers’ sensors to monitor baler output and adjust the amount CropSaver applied. With change in moisture or baling output CropSaver will adjust the system.  If the baler does not have a weigh scale or electronic bale length as an option then the operator will enter these figures and CropSaver calculates baler output.  When turning on headlands crops eyes will automatically pause the applicator so no preservative is wasted.  If a blockage occurs, when PTO speed drops CropSaver will again automatically pause.

Bale Marker will spray a red food grade colour mark onto the portion of the bale which has exceeded the operators alarm point.  The alarm point is set according to the operators preference.  The bales with red marks are easily identified and can be stacked separately from the bales which are within the operators parameters.  Managing the bale quality with moisture parameters is simple but effective using the Bale Marker.

Tagger provides crop inventory control and traceability from field to end user.  Bales can be traced from the field to stack and to the end user. Using a GPS antenna the location of where the bale was produced is recorded along with moisture, weight, unique bale ID, date and time.  Scanning the bales can be done with a hand scanner, loader mounted  or a drive through portal scanner.  The portal scanner will record the entire load as it is driven through the portal frame. (Tagger currently not available in the EU region)

CropSaver options are available for all New Holland Big Balers and previous BB range

The most accurate moisture meter on the market reading from 8-72% moisture

CropSaver High Output Electronic Manual Applicator Systems for round balers

This is a manually operated system for silage inoculants and acid additives. The rate is manually controlled and so is designed for fixed rate application of silage and haylage products.

Application of inoculants and acids

The new Electronic Manual High Output applicator is ideally suited for use with modern, high output large square balers

Applies a constant rate as set by the operator

Application rate can be adjusted by selecting different nozzles and pressure

Moisture readings determined using either a hand held probe or ideally for optimum efficiency a 600 Series or 300 Series moisture monitor system

Ideal for applying fixed rates of silage preservative or inoculant

Upgrades available to apply premium buffered propionic acid for hay and straw