With the Harvest Tec equipment the McHale baler offers more output and better efficiency. PFC are supplying equipment to not only enhance the McHale baler range of round balers, but also dedicated themselves to the process of quality hay and straw production. Bluetooth control to your IPad of through a tractor ISOBUS connection
McHale Round baler options
H2O Precision Moisture Sensor
Moisture Pro, 300 & 600 series
Automatic applicator 300 & 600 series
Traceability - Wet Bale Dye Marker (H2O & Moisture Pro 300 series)
Front Linkage options
Electronic Manual high output applicators
Complete control with either Bluetooth connection via an anntenna to an iPad or iPad Mini or through the tractor ISOBUS connection
NEW ..... H2O Prcision Moisture Sensor and New Wet Bale marker for round balers:
Low cost entry into Precision Moisture meter and Wet Bale Dye marker for round balers reading 6-60% within -/+ 1% accuracy and will utilise an iPhone, Android phone or tablet as it's monitor
Harvest Tec precision moisture measurement systems are the core component allowing the owner to both maximise the output of their baler, but also the quality of the bale they produce
These systems are available for round, conventional and square balers
Moisture sytems availablity for round balers
H2O Precision Moisture Sensor
300 series Moisture Monitor
600 series Moisture Pro
Our precision moisture meters use either electrical conductivity (round, conventional and large square) or microwaves (large square option) taking measurements many times per second
They measure not only the area of the bale in contact with the sensor, but also through the profile of the bale as it is produced by the baler. They measure both leaf moisture and moisture locked deep inside the plant stems that is often invisible to hand probes and inferior pad type moisture systems
These systems give the operator real time information as they bale, thus helping to improve bale quality and baling when the conditions are suitable. When conditions are not ideal they provide consistently accurate information to our automatic applicators, which allow for maximum baler output by increasing the operating window and reducing cost with longer day time baling and maximising efficiency.
McHale 300 Series PFC-3594526CX Automatic Application Systems for round balers:
300 Series 3494526CX Automatic Modular Applicator system suitable for round and conventional balers
As with all our Automatic Applicators, the 300 Series relies on highly accurate sensing discs on either side of the round bale chamber.
Instant response: The 300 Series Automatic Applicator features an improved flowmeter working through a single bypass pump, which supplies a constant pressure to a pulsating solenoid valve. This is capable of covering a wide range of application rates, but also provides improved response to variations in moisture and an instant on/off. This has the added benefit of being simple to service and operate. It comes as standard with a Bluetooth receiver to enable the system to be controlled using either an iPad or iPad Mini (not supplied)
300 Series Moisture Monitor:
The Mchale 300 Series Moisture Monitor is ideal for operators of round and conventional balers who want a straight-forward precision moisture monitor.
The moisture sensors are accurate to within 1% and take readings nine times a second, which are averaged every three seconds.
Moisture range round balers: 8-60%.
The 300 Series offers a premium specification for ease of use and simplicity.
It comes as standard with a Bluetooth receiver to enable the system to be controlled using either an iPad or iPad Mini (not supplied)
McHale 600 Series PFC-6494526BX Commercial Automatic Application Systems for round balers:
The latest HayBoss 600 series 6494526BX applicators for round balers
Moisture Pro is a Moisture monitoring system that will measure the moisture in the bale from 8-60%. The Moisture Pro is readily able to accept any of the following Harvest Tec modules depending on your individual requirements. Job records are fully downloadable with Moisture Pro.
McHale Automatic PFC6494526BX Applicator:
The high precision Harvest Tec Applicator can be ordered as a complete unit with moisture meter included. Adding the applicator module to your moisture meter allows you to automatically apply the correct amount of Baler’s Choice preservative on those higher moisture bales. The system will not only keep track of the moisture levels of the bales, but will also display and record the amount of preservative being applied and also how much was used per individual bale. The harvest Tec applicator is automatically paused, using sensors on the pickup, when no crop is entering the baler.
GPS Yield Mapping:
GPS yield mapping for accurate fertiliser utilisation.
Front Linkage options:
Automatic 300 series
Automatic 600 series
Harvest Tec High Output Electronic Manual Applicator Systems for round balers
This is a manually operated system for silage inoculants and acid additives. The rate is manually controlled and so is designed for fixed rate application of silage and haylage products.
Application of inoculants and acids
The new Electronic Manual High Output applicator is ideally suited for use with modern, high output fixed and variable chamber round balers and large square balers
Applies a constant rate as set by the operator
Application rate can be adjusted by selecting different nozzles and pressure
Moisture readings determined using either a hand held probe or ideally for optimum efficiency a 600 Series or 300 Series moisture monitor system
Ideal for applying fixed rates of silage preservative or inoculant
Upgrades available to apply premium buffered propionic acid for hay and straw
The only accurate moisture sensing on the market with a range from 6-60% moisture
Moisture sensing disc on both sides of the baler measuring completely through the bale 9 times per second averaging every 3 seconds with the same accuracy as the star-wheel sensors on large square balers