Harvest Tec equipment for John Deere has proved its commitment to the European farmer, supplying equipment to not only enhance their baler range, but also dedicated themselves to the process of quality hay and straw production, now with either ISOBUS or IPad control via Bluetooth
Harvest Tec PDF Brochures
Harvest Tec Automatic and Electronic Manual Applicators and Moisture Systems with the optional Wet Bale Marker for John Deere Conventional Balers
Complete control with either ISOBus or iPad control through Bluetooth
Harvest Tec 600 Series Moisture Pro
Moisture Pro is a Moisture monitoring system that will measure the moisture in the bale from 8-32%. The Moisture Pro is readily able to accept any of the following Harvest Tec modules depending on your individual requirements. Job records are fully downloadable with Moisture Pro.
Harvest Tec 600 Series Automatic Applicator & Equipment
The Harvest Tec 600 series automatic applicators are built and designed for the professional farmer, contractor or specialist hay producer and will accurately apply CropSaver Preservative onto hay and straw with moisture contents up to 30% and prevent heating and mould growth
The Harvest Tec applicator will cope with the high output and demand of the professional large scale farmer, specialist hay producer and farm contractor using a conventional small square baler with baling speeds up to 36 tonnes per hour. The Harvest Tec system enabling you to precisely apply Baler's Choice Preservative at rates of between 1.9 and 7.4 litres per tonne depending upon moisture content, which is accurately recorded from 8% to 32% within 1 percentage point of accuracy
In addition to the above features the 600 series is equipped with extra sensors for increased accuracy, along with job records that can be downloaded to the user’s computer. The system can operate the Wet Bale Marker system which would allow the user to automatically mark a bale that is out of the preferred moisture range.
John Deere Automatic Applicator 600 Series
Harvest Tec 600 series with the most impressive accurate star wheel moisture measuring system and is combined with a baling rate sensors to monitor the balers output. As baling speeds and moisture change the Harvest Tec applicator will continually monitor and adjust the application of Baler's Choice. This system can be controlled via ISOBUS or through a Bluetooth connection to an iPad or iPad Mini
Wet Bale Marker - Wet Bale Management
The Bale Marker is the easy and cost effective method to mark the bales that have high moisture spots. The Wet Bale Marker can be linked directly into Moisture Pro System or the fully Automatic Applicator. The Wet Bale Marker will spray a red food grade colour onto the bale flakes that have moisture readings above the alarm point. Marking high moisture bales allows the operator to store only bales within their preferred moisture range into the stack. All the marked bales can be stored separately as the quality of these high moisture bales will be reduced and so they will dry out and not damage surrounding bales that are within the operators preferred range.
Moisture Monitor 300 Series
The Harvest Tec 300 Series Moisture Monitor is ideal for operators of round and conventional balers who want a straight-forward precision moisture monitor.
The moisture sensors are accurate to within 1% and take readings nine times a second, which are averaged every three seconds.
Moisture range: Conventional balers: 8-32%.
The 300 Series offers a premium specification for ease of use and simplicity. It comes as standard with a Bluetooth receiver to enable the system to be controlled using either an iPad or iPad Mini (not supplied)
Automatic Applicator 300 Series
As with all our Automatic Applicators, the 300 Series relies on highly accurate Star Wheels on conventional balers on both sides of the bale chamber.
Instant response: The 300 Series Automatic Applicator features an improved flowmeter working through a single bypass pump, which supplies a constant pressure to a pulsating solenoid valve. This is capable of covering a wide range of application rates, but also provides improved response to variations moisture and an instant on/off. This has the added benefit of being simple to service and operate
Electronic Manual Applicator high output silage/haylage
Electronic Manual Extra high output Applicator
Automatic 300 series Applicator
Electronic Manual Applicator 100 Series
This is a manually operated system for hay preservatives, silage inoculants and acid additives. The rate is manually controlled and so is designed for fixed rate application of hay, silage and haylage products.
Application of hay preservative, inoculants and acids
The Electronic Manual applicator is ideally suited for use where a smaller amount of hay as baled
Applies a constant rate as set by the operator
Application rate can be adjusted by selecting different nozzles and pressure
Moisture readings determined using either a hand held probe or pad in the chamber, ideally for optimum efficiency a 600 Series or 300 Series moisture monitor system
Ideal for applying fixed rates of hay, haylage and silage preservative or inoculant
Upgrades available to apply premium buffered propionic acid for hay and straw
Baler's Choice Hay Preservative
Large Square bale to a maximum of 27% moisture
Round & Conventional bale to a maximum of 30% moisture
Baler Moisture Meter 600 & 300 series: The only accurate moisture sensing on the market with a range from 8-32% moisture